轴流泵报价_350zlb-70轴流泵定制商_500zlb
振动原因分析
水泵振动原因分析导致机组和泵房建筑物产生振动的原因较多,有些因素之间既有联系又相互作用,概括起来主要有以下四个方面的原因。
电气方面
潜水泵电机是机组的主要设备,电机内部磁力不平衡和其它电气系统的失调,常引起振动和噪音。如异步电动机在运行中,由定转子齿谐波磁通相互作用而产生的定转子间径向交变磁拉力,移动式混流泵生产厂家,或大型同步电机在运行中,农业混流泵生产厂家,定转子磁力中心不一致或各个方向上气隙差超过允许偏差值等,都可能引起电机周期性振动并发出噪音。
二泵盖是泵与进水管相连的零件,其端面与叶轮之间留有规定的轴向端面间隙在消除轴承轴向活动间隙以后,保持规定的轴向间隙。间隙过小产生磨擦,过大则会导致泵内压力水回流,石嘴山混流泵生产厂家,使泵的效率降低,通过增减调整纸垫达到规定的间隙。
ii. pump cover is
the part connected with water inlet pipe.there is an stated axial end face gap
between its end
face and
impeller(keep the stated axail gap after removing the bearing axial movable
gap).friction will be
produced if
the gap is too small, contrary, if the gap is too large, the pressure water in
pump will reflux which
makes the
feeiciency reduced.adjust the --- washer&make the gap be stated one.
2、水泵起动后有一股水就不出水了
after starting ,
the pump only send one stream water then no water runs out
1、吸入的水中有过多气泡
2、吸水管中窝存空气
3、吸水管或连接处垫料不严密有进气现象
4、底阀或叶轮有水草杂物填塞
1.there are too many bubbles in the
indrawn water
2.there is air in the suction pipes
3.the paddings in connected parts are
imprecision&produces leaking phenomenon
4.there are waterweeds&sundries
filled in the bottom valve/impeller
1、检查进水管末端是否在水平面以下一米左右
2、排除空气
3、高速垫料,填塞缝隙拧紧螺栓
4、消除水草杂物
1.check the end
of water inlet pipe if it is under the water surface at one meter
2. remove the
air
3.add padding to
fill the gaps&then tighten the bolts
4.clear the
waterweeds&sundries.
|
|||
北京 上海 天津 重庆 河北 山西 内蒙古 辽宁 吉林 黑龙江 江苏 浙江 安徽 福建 江西 山东 河南 湖北 湖南 广东 广西 海南 四川 贵州 云南 西藏 陕西 甘肃 青海 宁夏 物流信息 全部地区... |
|||
本站图片和信息均为用户自行发布,用户上传发布的图片或文章如侵犯了您的合法权益,请与我们联系,我们将及时处理,共同维护诚信公平网络环境! | |||
Copyright © 2008-2026 云商网 网站地图 ICP备25613980号-1 | |||
当前缓存时间:2025/9/25 4:15:18 |